Equus 3140 - Scan Tool CanOBD2&1 Kit Instrukcja Użytkownika Pobierz pdf (Strona 100)

98 CanOBD2&1

Toyota/Lexus OBD1 Systems

CODE RETRIEVAL PROCEDURE

Check your vehicle thoroughly before performing any test.

See Before You Begin on page 18 for details.

ALWAYS observe safety precautions whenever working on a

vehicle. See Safety Precautions on page 3 for more infor-

mation.

1. Locate the vehicle's Data Link Connector (DLC). See Data Link

Connector (DLC) on page 96 for connection location.

Some DLCs have a plastic cover that must be removed before

connecting the CanOBD2&1 Scan Tool's cable connector.

2. Connect the CanOBD2&1 Scan Tool cable (with the Toyota

Connector Cable Adaptor attached) to the CanOBD2&1 Scan Tool,

then connect the adaptor to the vehicle’s DLC. Press the

POWER/LINK button to turn the CanOBD2&1 Scan Tool ON.

3. Turn ignition ON and start engine. Warm engine to operating tem-

perature. (Shut engine off after warm up).

4. When prompted by the CanOBD2&1 Scan Tool, do the following

before proceeding to step 5:

■ Turn ignition ON. DO NOT start the

engine.

■ Make sure throttle is closed.

■ Set gear lever in "park" (for automatic transmissions) or “neutral”

for manual transmissions.

■ Turn off all accessories.

5. Press the ENTER/LD button to continue.

■ The CanOBD2&1 Scan Tool will begin the code retrieval process.

6. When the CanOBD2&1 Scan Tool is in

the process of retrieving codes, a "One

moment please..." message shows on

the CanOBD2&1 Scan Tool’s display.

■ If the CanOBD2&1 Scan Tool fails to

link to the vehicle’s computer a

“Vehicle is not responding” message

shows on the CanOBD2&1 Scan

Tool’s display. Do the following:

- Verify the ignition is ON.

- Check the cable connections at

the CanOBD2&1 Scan Tool and at

the vehicle’s DLC.

- Turn the ignition OFF, wait 10-12

seconds, then turn back ON to reset the computer.

- Press the ENTER/LD button and repeat steps 3 through

5 as necessary.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 111 112

Komentarze do niniejszej Instrukcji

Brak uwag

Equus 3140 - Scan Tool CanOBD2&1 Kit Instrukcja Użytkownika Strona 100

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Urządzenia pomiarowe Equus 3140 - Scan Tool CanOBD2&1 Kit